RunCam Split 4 V2 camera

SPLIT 4 – 4K recording and FPV in one device

SPLIT 4 combines 4K 30FPS and 2.7K 60FPS video recording with FPV mode in a single camera. With a latency of just 55ms, you get smooth and precise flight footage.

Compact and easy to install

The lens module is only 14 × 14 mm and the PCB mounting distance is 25.5 × 25.5 mm, so the camera easily fits even in the smallest drone frames.

„GyroFlow support – ultra-stable image

The built-in gyroscope enables GyroFlow image stabilization, so you can get smooth, professionally stabilized footage even without a mechanical gimbal. The difference between unstabilized and stabilized footage is immediately visible.

Sony 13 MP sensor – exceptional image quality

The high-resolution Sony 13 MP sensor ensures detailed 4K and 1080p images, rich colors, and excellent sharpness for both filming and FPV flights.

Specification:

• Model: Split 4;
• Image sensor: SONY 13 MP;
• Field of view (FOV): 140°;
• Image resolution:
4K @ 30fps;
2.7K @ 60fps;
2.7K @ 50fps;
1080p @ 60fps;
• Video file format: MP4;
• TV mode: NTSC (720 × 480) / PAL (720 × 576), switchable;
• Interface: UART;
• Supported microSD card: up to 128 GB;
• Recommended card: SAMSUNG 128 GB U3
(2.7K60 / 2.7K50 / 1080P120 requires U3 or higher; other modes require U1 or higher);
• SD card format: exFAT required, otherwise errors may occur;
• Power supply: DC 5-20V
(do not power directly from the battery - this may cause overvoltage and damage the camera);
• Lens module size: 14 × 14 mm;
• Mounting hole spacing: 25.5 × 25.5 mm;
• PCB board size: 29 × 29 mm;
• Operating current: up to 450 mA @ 5 V;
• Weight: 10.2 g.

Package:

1 x SPLIT 4 camera with panel;
1 x bracket from 14 mm to 19 mm (14–19 bracket);
1 x 3-pin cable;
1 x M2 screw set;
1 x user manual.