GEPRC TAKER F722 BT 32Bit 50A STACK

The GEP-F722-BT-HD V3 flight controller is an advanced kit compatible with the DJI Air Unit system. It uses an STM32F722 microcontroller, an ICM42688-P gyroscope, an integrated 512 MB Blackbox, a barometer, and Bluetooth connectivity for wireless parameter adjustment.

Together with the GEP-BL32 50A 96K 4IN1 32bit ESC, this kit ensures smooth flight control, reliable power supply, and accurate sensor operation.

Features:

• Reliable STM32F722 microcontroller is used;
• The latest generation ICM42688-P gyroscope is installed;
• 512 MB Blackbox flight data recording;
• Bluetooth function for remote parameter changes;
• Integrated LC filter – cleaner electrical voltage;
• Improved Type-C USB connector – longer service life;
• Compatible with DJI Air Unit – no soldering required;
• GEP-BL32 50A 96K 4IN1 ESC ensures a smooth flying feel;
• Simple, effective installation with shock-absorbing gaskets – stable gyroscope operation;
• Integrated barometer for altitude data;
• Two independent BECs: 9V@2.5A and 5V@3A – stable power supply.

Specification:

GEP-F722-BT-HD V3 flight controller:

• Microcontroller: STM32F722;
• Gyroscope (IMU): ICM42688-P (SPI connector);
• DJI Air Unit connector: direct connection;
• Blackbox: 512 MB integrated memory;
• Bluetooth: supported;
• Barometer: supported;
• USB connector: Type-C;
• OSD: BetaFlight OSD with AT7456E chip;
• BEC: 5V@3A and 9V@2.5A;
• Firmware: GEPRCF722_BT_HD_V3;
• Dimensions: 36.9×36.9 mm, mounting holes: 30.5×30.5 mm (ø4 mm → ø3 mm with silicone ring);
• Supply voltage: 3–6S LiPo;
• UART connectors: 5 (UART4 for Bluetooth);
• Power filter: Integrated LC filter;
• Weight: 8.2 g.

GEP-BL32 50A 96K 4IN1 ESC:

• Model: GEP-BL32 50A 96K 4IN1 ESC Supply voltage: 3-6S LiPo
• Continuous current: 50A
• Short-time current (5 sec.): 55A
• Current measurement (galvanometer): supported
• Telemetry: supported
• Protocols: DShot 150 / 300 / 600
• Dimensions: 42.5×42.1 mm, mounting holes: 30.5×30.5 mm
• Weight: 14 g
• Firmware: ST_G0_05 – 31.92

Note: Factory-installed BL32 trial software, tested for safety and reliability. Also supports AM32 (requires user installation).

Package:

1x Flight Controller Board (FC);
1x 4IN1 ESC board;
1x Capacitor;
1x O3 3-in-1 connection cable;
1x FC adapter cable;
1x SH1.0 4-pin silicone cable;
1x Camera connection cable;
1x VTX (video transmitter) connection cable;
1x XT60 power cable;
4x M3×30mm screws;
4x M3×25mm screws|;
8x Nylon nuts;
12x Silicone anti-vibration gaskets.