GEPRC TAKER F405 BLS 60A V2 STACK

GEPRC TAKER F405 BLS 60A V2 STACK is a powerful FPV drone electronics kit, consisting of a flight controller based on the STM32F405 processor and ICM42688-P gyroscope and a 60 A 4-in-1 ESC. The controller has a 16 MB Blackbox, barometer, Betaflight OSD, 6 UART interfaces, 5 V / 3 A and 12 V / 2.5 A BEC, USB Type-C and direct DJI Air Unit connection, while the ESC supports 3-6S LiPo, DShot150/300/600 protocols and provides up to 60 A continuous current for each channel. The standard 30.5 x 30.5 mm mounting allows the kit to be used in various powerful FPV drones.

Features:

• The popular STM32F405 processor is used;
• Integrated latest generation ICM42688-P gyroscope;
• 16 MB Blackbox memory for flight data;
• Integrated LC filter to help reduce electrical interference;
• Updated USB Type-C connector;
• Ability to directly connect DJI Air Unit;
• Comes with TAKER H60 BLS 60A 4-in-1 ESC, ensuring smooth and precise control;
• Simple and practical installation with anti-vibration elements that help ensure stable operation of the gyroscope;
• Two independent BEC power outputs: 12 V / 2.5 A and 5 V / 3 A.

Specification:

FC:

• Processor (MCU): STM32F405;
• Gyroscope (IMU): ICM42688-P (SPI);
• DJI Air Unit connector: direct connection;
• Blackbox memory: 16 MB integrated;
• Barometer: BMP280;
• Motor outputs: M1–M6;
• USB connector: Type-C;
• OSD: Betaflight OSD with AT7456E chip;
• BEC: two independent – 5 V / 3 A and 12 V / 2.5 A;
• Software Target: GEPRCF405;
• Mounting: 30.5 x 30.5 mm; Ø4 mm holes, with silicone anti-vibration rings – Ø3 mm;
• Input voltage: 3-6S LiPo;
• UARTs: 6;
• Power filter: integrated LC filter;
• Weight: 7.3 g.

ESC:

• Input voltage: 3-6S LiPo;
• Current measurement: supported;
• Continuous current: 60 A;
• Maximum short-term current: 65 A (5 sec.);
• Supported protocols: DShot150 / DShot300 / DShot600;
• Dimensions: 42 x 45.7 mm;
• Mounting: 30.5 × 30.5 mm; Ø4 mm holes, with silicone anti-vibration rings – Ø3 mm;
• Weight: 14.9 g;
• Firmware Target: B_X_30.

Package:

1x GEP-F405-HD V3 Flight Controller;
1x TAKER H60_BLS 60A 4IN1 ESC;
1x capacitor;
1x DJI Air Unit adapter cable;
1x flight controller adapter cable;
1x XT60 power cable;
4x M3 x 30mm screws;
4x M3 x 25mm screws;
8x nylon nuts;
8x silicone anti-vibration bushings;
2x SH1.0 4-pin silicone wires;
1x camera connection cable.