GEPRC TAKER F405 20A ELRS2.4G 2~4S AIO

TAKER F405 20A ELRS 2.4G 2-4S AIO is a compact and only 7g-weighting all-in-one FPV board with STM32F405 processor, ICM42688-P gyroscope and integrated ELRS 2.4 GHz receiver. It has 5 UART interfaces, 6-pin connector for convenient connection of digital HD VTX systems, supports 2-4S LiPo batteries and uses Bluejay ESC software. The ESC provides 20A continuous and up to 25A transient current, and also supports OSD, buzzer and LED. Perfect for 1.6-2.2 inch micro FPV drones.

Features:

• STM32F405 BGA processor with compact AT7456E OSD chip, ensuring a space-saving design;
• Integrated ELRS 2.4 GHz receiver, allowing for simpler and neater electronics installation;
• 5 full-fledged UART interfaces and support for direct HD VTX connection;
• Bluejay ESC software ensures smooth and precise motor control;
• Ultra-lightweight design, just 7g, suitable for 1.6-2.2 inch FPV drones.

Specification:

• Product name: TAKER F405 20A ELRS 2.4G 2-4S AIO;
• Processor (MCU): STM32F405 BGA;
• Gyroscope (IMU): ICM42688-P (SPI);
• FC software: GEPRC_TAKER_F405_AIO;
• Blackbox memory: integrated 16 MB Flash memory;
• OSD: Betaflight OSD with AT7456E chip;
• UART: R1-T1 / R2 / R3-T3 / R4-T4 / R5-T5 / R6-T6;
• Buzzer support: yes;
• LED support: yes;
• USB: SH1.0 6-pin connector to USB Type-C;
• BEC output: 5 V / 2.5 A;
• ESC software: Bluejay 20A;
• Continuous current: 20 A;
• Maximum current: 25 A (10 sec.);
• Power supply: 2–4S LiPo;
• ESC protocols: DShot600, OneShot, MultiShot;
• Dimensions: 31.5 x 31.5 mm;
• Mounting dimensions: 25.5 x 25.5 mm, M3 rubber bushings for M2 screws;
• Weight: 7 g.

The high-performance STM32F405 BGA processor, operating at up to 216 MHz, together with the ICM42688-P gyroscope, forms a stable and reliable hardware combination that ensures precise flight control.

20A continuous current and up to 25A peak current (10 sec.). Up to 128kHz PWM frequency provides smoother, more precise and faster responsive flight control.

Extensive functionality in a compact AIO board – ICM42688-P gyroscope, integrated ELRS 2.4 GHz receiver, barometer, 5 UART interfaces, and optional 5 V or BAT VTX power supply.

Convenient HD VTX connection without soldering - a special connector allows you to quickly and easily connect a digital video transmission system, reducing the amount of wiring and soldering work.

Package:

1x TAKER F405 20A ELRS 2.4G 2-4S AIO;
1x XT30 18AWG 7 cm power cable;
1x 35V 220µF capacitor;
1x 60 mm SH1.0 6-pin duplex cable;
1x SH1.0 6-pin cable;
1x USB Type-C configuration board;
1x 60 mm SH1.0 5-pin duplex cable;
8x M2 x 6.5 mm FC rubber mounting bushings (black).

Connection/diagram: