GEPRC MATEN 5.8G 5W VTX PRO

MATEN 5.8G 5W VTX PRO is a high-end video transmitter with five adjustable power levels up to 5000mW, ensuring a stable signal. The sturdy CNC aluminum body and integrated cooling fan improve heat dissipation and reliability, and the built-in microphone allows you to transmit real-time audio from the FPV drone. The VTX supports the IRC Tramp protocol for parameter control via OSD, operates in the 7-36V voltage range, has temperature protection and 80 channels.

Features:

• Five adjustable power levels up to 5000 mW – ideal for long-range flights;
• Sturdy CNC aluminum alloy body helps dissipate heat effectively;
• Integrated micro turbo fan for active cooling;
• Wide input voltage range: 7–36 V;
• One function button and three indicator lights for easy operation;
• Supports IRC Tramp VTX control protocol for parameter adjustment via OSD;
• Temperature protection against overheating;
• Integrated microphone for real-time audio transmission;
• Supports 80 transmission channels.

Specification:

• Model: GEPRC MATEN 5.8G 5W VTX PRO;
• Dimensions: 60 x 33.2 x 19.1 mm;
• Mounting hole size: 20 x 20 mm (M2), 25.5 x 25.5 mm (M2);
• Output power: 300 mW / 600 mW / 1600 mW / 3000 mW / 5000 mW / Pit mode;
• Frequency range: 4.9–5.8 GHz;
• Channels: 80CH;
• Input voltage: DC 7-36V (2-8S battery);
• Output voltage: 5 V @ 600 mA;
• Protocol: IRC Tramp;
• Antenna connector: SMA;
• Wiring connector: SH1.25 6 pin;
• Microphone: Built-in microphone;
• Weight: 49.5 g (VTX only).

Measurements:

Mounting holes:

• Channel light: blue;
• Band light – frequency band light: green;
• Power light: red;
• Switch – switch.

1. Press and hold the button for 2 seconds - the blue light will start flashing and the device will enter frequency adjustment mode. Short presses will quickly switch frequencies.

2. After changing the frequency, within five seconds, press and hold the button again for 2 seconds - the green light will start flashing and the device will enter the Band adjustment mode. Change the band with short presses.

3. After switching the band, within five seconds, press and hold the button again for 2 seconds - the red light will start flashing and the device will enter power adjustment mode. Adjust the power with short presses.

Notes:

• Always connect the antenna before use;
• It is essential to fly with constant airflow and good ventilation to avoid overheating; in enclosed environments, use an additional cooling fan;
• The 5V output is only for the camera or cooling fan! Never connect a battery to the 5V output - this may damage the VTX.

Frequency table:

Important* The VTX transmitter supports 80 channels. If you use it with Betaflight Configurator, only 64 channels will be adjustable due to ground station limitations, so you can delete unused channels.

Package:

1x MATEN 5.8G 5W VTX PRO VTX;
1x SMA (inner needle) to SMA (inner hole) connector;
1x SH1.25 6P connection cable;
6x M2×5 screws;
6x M2×6 screws;
1x Instruction.