GEPRC MATEN 5.8G 10W VTX PRO

MATEN 5.8G 10W VTX PRO is a high-end video transmitter with four adjustable power levels up to 10 W, operating in the 4884-6184 MHz frequency range and allowing direct frequency input in the configurator, ensuring a stable signal. The robust CNC aluminum housing and integrated cooling fan improve heat dissipation and reliability, and the IRC Tramp protocol allows you to control settings via OSD. The device supports 12-36 V voltage, has temperature protection and 104 channels.

Features:

• Four adjustable power levels up to 10 W – ideal for long-haul flights;
• Sturdy CNC aluminum alloy body helps dissipate heat effectively;
• Integrated micro turbo fan for active cooling;
• Wide input voltage range: 12–36 V;
• One function button and three indicator lights for easy operation;
• Supports IRC Tramp VTX control protocol for parameter adjustment via OSD;
• Temperature protection against overheating;
• Supports 104 transmission channels;
• It is possible to enter the frequency directly in the configurator.

Specification:

• Model: GEPRC MATEN 5.8G 10W VTX PRO;
• Dimensions: 78.5 x 43.6 x 25.3 mm;
• Mounting hole size: 20 x 20 mm (M2), 30.5 x 30.5 mm (M3);
• Output power: 25 mW / 2.5 W / 5 W / 10 W / Pit mode;
• Frequency range: 4884–6184 MHz;
• Channels: 104CH;
• Direct frequency input: Supported;
• Protocol: IRC Tramp;
• Input voltage: DC 12-36V (3-8S battery);
• Maximum operating current: 3.5 A;
• Output voltage: 5 V @ 600 mA;
• Antenna connector: SMA;
• Cable connectors: PH2.0 2 pin, GH1.25 5 pin;
• Weight: 110 g (VTX only).

Measurements:

Mounting holes:

• Channel light: blue;
• Band light – frequency band light: green;
• Power light: red;
• Switch – switch.

1. Press and hold the button for 2 seconds - the blue light will start flashing and the device will enter frequency adjustment mode. Short presses will quickly switch frequencies.

2. After changing the frequency, within five seconds, press and hold the button again for 2 seconds - the green light will start flashing and the device will enter the Band adjustment mode. Change the band with short presses.

3. After switching the band, within five seconds, press and hold the button again for 2 seconds - the red light will start flashing and the device will enter power adjustment mode. Adjust the power with short presses.

Notes:

• Always connect the antenna before use;
• It is essential to fly with constant airflow and good ventilation to avoid overheating; in enclosed environments, use an additional cooling fan;
• The 5V output is only for the camera or cooling fan! Never connect a battery to the 5V output - this may damage the VTX.

Frequency table:

Important* The VTX transmitter supports 104 channels. If you use it with the Betaflight Configurator, only 64 channels will be adjustable due to ground station limitations, so you can delete unused channels.

Package:

1x MATEN 5.8G 10W VTX PRO;
1x Power cable (PH1.25 2 pin, 150 mm);
1x FC cable (GH1.25 5 pin, 150 mm);
6x M2×5 screws;
6x M3×5 screws;
1x Instruction.