GEPRC MATEN 5.8G 2.5W VTX

About:

• MATEN 5.8G 2.5W VTX is a high-power video transmission device with 5 adjustable power levels and a maximum power level of up to 2500mW. The transmission signal is very stable and the bandwidth is excellent.
• The MATEN 5.8G 2.5W VTX body is made of high-strength aluminum alloy CNC, which helps the device cool down faster;
• The device supports IRC Tramp protocol and allows quick parameter adjustment via OSD. It has a wide voltage input from 7 to 36 V and temperature control protection to prevent overheating and burning. Supports 30.5 × 30.5 mm (M3) mounting hole position.

Features:

• Five adjustable power levels, up to 2500 mW, suitable for long-range flights;
• Selected high-strength aluminum alloy CNC body;
• Wide voltage input, supports 7V–36V;
• One function button, three indicator lights, easy to operate;
• VTX control protocol IRC Tramp, supports OSD parameter adjustment;
• Temperature control protection function to prevent overheating;
• Built-in microphone transmits drone sounds in real time;
• Supports 72 transmission channels.

Specification:

• Model: MATEN 5.8G 2.5W VTX;
• Dimensions: 36.4 × 36.4 × 7.9 mm;
• Mounting holes: 30.5 × 30.5 mm (M3);
• Output power: 25 mW / 200 mW / 600 mW / 1600 mW / 2500 mW / Pit mode;
• Frequency: 5.8G;
• Channels: 72CH;
• Input voltage: DC 7-36V (2-8S battery);
• Output voltage: 5V@600mA;
• Protocol: IRC Tramp;
• Antenna connector: MMCX;
• Cable connector: SH1.0 6-pin;
• Video format: PAL/NTSC;
• Microphone: built-in;
• Weight: 18 g.

• Channel light: blue;
• Band light – frequency band light: green;
• Power light: red;
• Switch – switch.

1. Press and hold the button for 2 seconds, the blue light will start flashing, entering the frequency adjustment mode. You can switch frequency points by pressing it quickly.

2. After switching frequency points, within five seconds, press and hold the button again for 2 seconds - the green light will light up, entering the frequency band adjustment mode. You can switch bands by pressing it quickly.

3. After switching the band, within five seconds, press and hold the button again for 2 seconds - the red light starts flashing, entering the power adjustment mode. You can adjust the power by pressing it quickly.

Notes:

• Always connect the antenna before use;
• It is essential to fly with constant airflow and good ventilation to avoid overheating; in enclosed environments, use an additional cooling fan;
• The 5V output is only for the camera or cooling fan! Never connect a battery to the 5V output - this may damage the VTX.

Package:

1× MATEN 5.8G 2.5W VTX;
1× MMCX copper antenna;
1× MMCX-SMA connector;
1× SH1.0 6-pin connection cable;
5× M3*7 screws;
5× M3*8 screws;
5× M3*10 hex screws;
5× M3*5 insulation posts;
5× M3 nylon nuts;
1× product description.