Axisflying REX 5 SE frame

Axisflying REX 5 SE is an extremely lightweight and strong 5-inch FPV drone frame designed for speed racing and dynamic freestyle flights. True X geometry ensures precise and uniform control in all directions, while T700 carbon fiber construction with 7075-T6 aircraft aluminum parts provides an excellent balance of strength and low weight. Weighing only about 58 g, the frame has 6 mm thick beams and standard mounting points for the main electronics, video transmitter and motors.

Features:

• True X geometry – precise and uniform control in all directions;
• Ultra-lightweight construction – the frame weighs about 58 g without printed parts;
• T700 carbon fiber – a good balance of light weight and impact resistance;
• 7075-T6 aircraft aluminum parts – for additional structural rigidity;
• 6 mm thick beams – adapted for intensive racing and freestyle flights;
• Standard electronics mountings – 20 x 20 mm for the electronics unit and 25.5 x 25.5 mm for the video transmitter;
• 3D printed protections – provided for the camera, receiver, antenna and video transmitter;
• Turtle mode-adapted design – the kit includes a special 3D printed vertical part that makes it easier for the drone to flip over after a fall.

Specification:

• Model: REX Frame;
• Wheelbase: 188.91 mm;
• Supported propellers: up to 5.1 inches;
• FC mounting: 20 x 20 mm (M3);
• Motor mounting: 16 x 16 mm (M3);
• Camera mounting width: 14 mm;
• Electronics mounting height: 23 mm;
• Carbon fiber: T700;
• Aluminum parts: 7075-T6 aviation aluminum alloy;
• Top plate thickness: 2 mm;
• Thickness of the middle plate: 3 mm;
• Bottom plate thickness: 2 mm;
• Beam thickness: 6 mm;
• VTX mounting: 25.5 x 25.5 mm (M2);
• Frame weight: 58 ± 5 g (without printed parts).

Measurements:

The 188.9mm compact True X geometry ensures symmetrical weight distribution, precise and fast control of the drone. This design is especially suited for FPV racing - it allows you to accurately overcome fast turns, smoothly go around obstacles and ensures sharp reactions during acceleration.

Lightweight yet extremely strong construction – 6mm thick frame beams, T700 high-strength carbon fiber top and bottom plates, and 7075-T6 aircraft aluminum center plate provide high rigidity and impact resistance while keeping weight low. The construction is designed for intensive training and FPV racing.

Easy and convenient frame assembly – the structure is designed so that all main parts can be easily assembled using the included screws and 23 mm aluminum struts. Separate TPU parts are designed to securely attach and protect the receiver, camera and other electronics.

Package:

1x bottom frame plate;
1x middle frame plate;
1x top frame plate;
4x frame beams;
2x VTX mounting/protection parts;
1x receiver mounting bracket;
1x Firefly Mini camera mount;
4x M3 x 23 mm aluminum struts;
4x non-slip battery spacers;
1x Shark Fin printed detail;
1x rear TPU part;
1x M2 L-shaped hex key;
1x M3 L-shaped hex key;
4x M3 stainless steel nuts;
4x nylon nuts;
1x LiPo battery strap;
2x M2 × 4mm screws;
8x M3 × 9mm screws;
4x M3 × 8mm screws;
4x M3 × 10mm screws;
4x M3 × 16mm screws;
4x M3 × 22mm screws.