Flywoo Firefly16/18 1S Nano Baby V3 frame

The Flywoo Firefly 16/18 1S Nano Baby V3 frame is extremely lightweight and compact. It offers flexible size options (16 or 18 versions) allowing you to easily assemble high-performance Nano Baby-class drones.

Specification:

• Brand: FLYWOO;
• Model: Firefly16/18 1S V3;
• Main board thickness: 2 mm;
• Flight controller hole layout: 25.5 x 25.5 mm;
• Motor mounting distance: 6.6 mm;
• Screw size: 40 mm x 3 (16) / 45 mm x 2 (18);
• Weight: 7.9g (16) / 8g (18).

Measurements:

The configuration below must be strictly followed to ensure gimbal-level image stabilization and ultra-stable video recording. When installing the canopy, it is essential to use the white vibration dampers provided in the kit. Do not tighten all four canopy screws all the way down — they should remain flush with the printed part surface, and the canopy itself should remain slightly loose.

The Firefly16/18 is extremely lightweight, compact and offers a variety of safety and protection options. The full-coverage top cover ensures jello-free HD viewing and maximum impact protection. The durable TPU mounts are lightweight yet strong, making them ideal when weight reduction is important. Screw guards can also be installed for full impact protection. The interchangeable battery holder is compatible with 1S 550mAh / 750mAh / 1000mAh batteries. The one-piece carbon fiber base plate provides a good balance of impact resistance and low weight.

Package:

1x Firefly 18-04 frame set;
1x Carbon fiber top plate;
1x TPU canopy;
1x 450/750 mAh battery TPU holder V3;
2x Nylon spacers (columns);
4x Vibration absorbing shock absorbers;
1x Heat-resistant insulating tape;
1x 5.8G copper tube antenna;
1x Plastic cable ties;
1x Screw set;
1x O4 custom housing;
1x Ultra-light propeller guards.