DeepSpace SEEKER5 DC/XL Freestyle frame

DeepSpace SEEKER5 is a robust 5-inch carbon fiber FPV drone frame designed for dynamic freestyle flights and high-quality filming. The frame is offered in DC and XL versions: the DC design provides a cleaner field of view for the camera, while the XL geometry is focused on maneuverable freestyle flights. SEEKER5 is compatible with DJI O4 Pro and DJI O3 Air Unit systems, has a front-mounted GPS location and convenient external receiver mounting.

Features:

• 5-inch FPV frame – designed for freestyle drones;
• Carbon fiber construction – strong and suitable for intensive flights;
• Two versions – DC and XL – can be selected according to the desired flight character;
• DC geometry – wide field of view of the camera, less obstructed by propellers, suitable for filming;
• XL geometry – focused on maneuverable and dynamic freestyle flights;
• DJI O4 Pro compatibility;
• DJI O3 Air Unit compatibility;
• Front-mounted GPS;
• External receiver mounting.

Specification:

• Wheelbase: DC 228 mm / Squashed X 224 mm;
• Maximum propeller size: 5.1 inches;
• Motor mounting: 16 x 16 mm (M3);
• Electronics stack mounting: 20 / 30.5 mm (M3);
• Camera width: 14–20 mm;
• VTX mounting: 20 / 25.5 mm (M2) / 30.5 mm (M3);
• Top plate thickness: 2 mm;
• Thickness of the middle plate: 2.5 mm;
• Bottom plate thickness: 2.5 mm;
• Frame leg thickness: 5 mm;

The DeepSpace SEEKER5 frame is available in two different geometries – DC and XL. The DC version provides a wide and unobstructed field of view for the camera, making it perfect for high-quality filming. The XL version features smooth roll control and quick response to pitch movements, making it more focused on dynamic freestyle flights.

The front of the frame features a dedicated 18 x 18 x 6 mm GPS module mounting location. Separating the GPS from the main electronics helps reduce interference, resulting in faster satellite acquisition and a more stable GPS signal.

A special 12 × 20 x 6 mm receiver mounting location is provided on the outside of the frame. This solution facilitates receiver mounting, provides more space for the main electronics, and allows for more convenient maintenance or component replacement.

SEEKER5 features a robust and easy-to-repair design – individually replaceable frame legs, side electronics guards, and convenient antenna and power connector installation. Two geometries are available: DC – 228 mm and XL – 224 mm.

Package:

1x top plate;
1x middle plate;
1x bottom plate;
2x front frame legs;
2x rear frame legs;
1x small plate;
1x left CNC camera plate;
1x right CNC camera plate;
2x M2x5mm screws;
2x M2x8 mm self-tapping screws;
2x M2.5×8mm screws;
14x M3x8mm screws;
8x M3x8 mm screws with washers;
8x M3x10 mm screws with washers;
6x M3x12mm screws;
4x M3x14mm screws;
4x M3x22 mm stack screws;
4x M1.6×8mm DJI O3 screws;
4x M2x5 mm camera screws;
4x M2x8 mm DJI O4 Pro screws;
1x M5x20mm screw;
8x M3 nylon nuts;
1x M5 square nut;
4x M3 struts;
4x motor cable protectors;
1x non-slip battery mat;
1x left side plate;
1x right side plate;
1x TPU GoPro mount;
1x TPU VTX antenna mount;
1x TPU RX antenna holder;
1x TPU receiver holder;
4x TPU gaskets;
2x TPU camera gaskets;
1x TPU front protection;
1x TPU capacitor holder;
2x DJI O3 silicone camera gaskets;
4x DJI O4 Pro silicone camera gaskets;
2x 20×250 mm battery straps;
1x M1.5 Phillips screwdriver;
1x XT60 power connector;
1x 35V 470µF capacitor.