DeepSpace SEEKER 3 DC freestyle frame

DeepSpace SEEKER 3 DC is a compact and robust 3-inch FPV frame designed for dynamic freestyle flights. Carbon fiber construction with CNC aluminum parts ensures a good balance of strength and weight. The frame is designed for DJI O4 Pro and DJI O3 Air Unit video transmission systems.

Features:

• 3-inch freestyle construction – compact and maneuverable frame for active flying;
• Carbon fiber construction – ensures strength while maintaining a low frame weight;
• CNC aluminum side plates – additionally strengthen the structure and protect internal components;
• Compatible with DJI O4 Pro and O3 Air Unit – adapted to modern DJI digital FPV systems;
• Up to 155° camera viewing angle – provides more freedom in choosing filming and camera settings;
• Replaceable 3.5 mm thick beams – if one beam is damaged, there is no need to replace the entire main frame;
• Universal electronics mounting – supports 20 x 20 mm and 25.5 x 25.5 mm mounting formats;
• TPU component support – antenna, camera and other accessory mounts are provided.

Specification:

• Wheelbase: 139 mm;
• Weight: 54.9 g (with TPU parts);
• Beam thickness: 3.5 mm;
• Stack mounting: 22 mm;
• Propeller size: 3 inches;
• Camera width: 19/20 mm;
• Motor mounting: 9 x 9 / 12 x 12 mm;
• VTX mount: 25.5 / 20 mm, M2;
• Recommended motors: Aether 1505 4000KV;
• Recommended battery: 4S 650–1100 mAh.

The front of the frame is designed to accommodate the GPS module, which helps reduce interference from electronics and ensures faster and more stable satellite signal reception. It is recommended to use a size 121 or 122 GPS module.

CNC aluminum alloy side plates reinforce the front of the frame and help protect the FPV camera and its lens from impacts. The sturdy construction also gives the frame a distinctive and neat appearance.

The lightweight yet sturdy frame design ensures a lower overall weight of the drone, making the flight more agile, maneuverable, and dynamic.

The frame design ensures a wide, unobstructed field of view of the camera of up to 155°, so you can enjoy better visibility and observe your surroundings more clearly during flight.

The frame features a practical and easy-to-maintain design - a fixed XT30 power socket ensures neat battery connection, interconnected beams increase structural rigidity, and individually replaceable beams make repairs easier. The camera mounting design helps reduce vibrations and the "jello" effect when filming.

Package:

1x top plate;
1x middle plate;
1x bottom plate;
2x front beam;
2x rear beam;
1x left CNC camera plate;
1x right CNC camera plate;
4x M1.6 x 8mm screw (DJI O3);
4x M2 x 5mm screw;
18x M2 x 6mm screw;
12x M2 x 7mm screw;
4x M2 x 8mm screw;
4x M2 x 9mm screw;
2x M2 x 12mm screw;
4x M2 x 20mm screw;
2x M2 x 21mm stud;
2x M2 x 22mm stud;
8x M2 nylon nut;
4x motor cable protection tube;
1x non-slip battery mat;
1x TPU GPS holder;
1x TPU VTX antenna mount;
1x TPU RX antenna holder;
1x TPU RX holder;
4x TPU padding;
2x TPU camera padding;
1x TPU front protection;
2x DJI O3 silicone camera padding;
4x DJI O4 Pro silicone camera pads;
2x 16 x 180 mm battery strap;
1x M1.5 Phillips screwdriver;
1x XT30 power connector;
1x capacitor.