Holybro Kakute F722 Flight Controller

Features:

• High-performance STM32 F722 microcontroller operating at up to 216 MHz;
• ICM42688P gyroscope with independent low-noise power supply;
• Various connectors for quick and easy connection: ESC, digital VTX, analog VTX, receiver (RX) and LED connectors;
• Integrated analog video OSD and 16 MB Blackbox memory;
• High-power synchronous BEC, supporting up to 8S power supply and providing stable 9V/3A and 5V/2A output.

Specification:

• MCU: STM32F722 32-bit processor, 216 MHz, 256 KB RAM, 512 KB Flash;
• IMU: ICM42688-P (SPI);
• Barometer: BMP280 (legacy) or SPA06;
• OSD: AT7456E;
• UART: 5 hardware UARTs (UART1, UART2, UART3, UART4, UART6);
• PWM outputs: 7 (6 for motors, 1 LED);
• Blackbox memory: 16 MB integrated;
• Supported battery: 3S–8S LiPo;
• BEC: 9V/3A, 5V/2A, 3.3V/0.2A;
• ESC connectors: 2x JST-SH 8-pin;
• HD VTX connector: 1x JST-SH 6-pin;
• Receiver and analog camera connectors: 2x JST-SH 4-pin;
• LED connector: 1x JST-SH 3-pin;
• USB connector: USB Type-C;
• Dimensions: 35 x 35 mm;
• Mounting hole layout: 30.5 x 30.5 mm (standard);
• Weight: 8 g.

Scheme:

Firmware Targets:

• Betaflight Target: KAKUTEF7MINIV3;
• INAV Target: KAKUTEF7MINIV3.

Instruction:

• User manual and connection diagram.

Package:

1x Kakute F722 flight controller;
4x M3 silicone anti-vibration bushings;
1x JST-SH 1.0 8-pin 150 mm cable (for ESC connection);
2x JST-SH 1.0 6-pin 80 mm and 150 mm cables (for connecting DJI Air Unit);
1x JST-SH 1.0 6-pin colored silicone 150 mm cable (for Caddx HD system and other VTX);
1x JST-SH 1.0 4-pin to Dupont 150 mm cable;
1x JST-SH 1.0 3-pin to Dupont 150 mm cable;
1x JST-SH 1.0 4 pin to Molex 1.25 150 mm cable.

Additional information: