Flywoo GOKU H743 PRO FC Plug&Play O4 / O4 Pro

GOKU H743 PRO FC is a high-end flight controller with a powerful STM32H743VIH6 (480 MHz) processor and dual ICM42688P gyroscopes, ensuring precise and stable flight. The built-in 512 MB "Blackbox" memory allows you to store detailed flight data for analysis, and the DPS310/SPL06 barometer and AT7456E OSD provide additional functions for navigation and video information. The controller has 7 UART ports, 12 PWM outputs, dual camera support, 10V/5V 3A BEC power supply and works with Betaflight, INAV and Ardupilot software, making it suitable for both freestyle and more advanced projects.

Features:

• Powerful: 480 MHz STM32H743 chip enables more complex functions and expansion;
• Dual gyroscope for stability: ICM42688P dual gyroscopes reduce noise and delay, making flight smoother;
• Efficient power supply: Dual 10V/5V 3A BEC ensures stable power supply for devices;
• Universal connections: 7 UART ports and 8 motor outputs, integrated dual camera switching, VTX, GPS, receiver and dual ESC interfaces;
• Multiple firmware support: Compatible with Betaflight, INAV and Ardupilot;
• Large memory: 512 MB blackbox.

Specification:

GOKU H743 PRO Flight Controller

• BetaFlight software: Flywoo H743PRO;
• INAV software: Flywoo H743PRO;
• APM software: Flywoo H743PRO;
• Memory (Flash): 2MB;
• MCU: STM32H743VIH6;
• Gyroscope: ICM42688P ×2;
• OSD: AT7456E (LGA16);
• Barometer: DPS310/SPL06;
• Blackbox memory: 512MB;
• UART connectors: 1/2/3/4/6/7/8;
• I2C: 2;
• PWM: 12;
• Input voltage: 7.4V–26V / 2–6S LiPo/LiHV;
• BEC: 10V 3A / 5V 3A;
• Camera support: CAM1, CAM2;
• Flight controller size: 36.5 x 36.5 x 8.45 mm (height with connector);
• Mounting holes: M3 30 x 30 mm;
• Weight: 9.9 g.

Why choose GOKU H743 PRO flight controller? High-performance STM32H743 MCU, dual gyroscope, 12 channels, PWM output support.

Dual 10V/5V 3A BEC ensures stable power supply for additional devices. Integrated two ESC ports and two camera connectors provide more flexibility for assembly, and a large 512MB Flash memory allows you to store detailed flight data. The controller is compatible with Betaflight, INAV and Ardupilot software, making it suitable for a variety of flight styles and configurations.

The flight stability, response speed and scalability of FPV drones directly depend on the performance of the main control chip. Compared with the STM32F722, the STM32H743 is a new generation of high-performance MCU with significant improvements in key parameters, ensuring higher control accuracy, flight stability and device compatibility.

The flight controller uses two independent ICM42688P gyroscopes, which help ensure stable operation, more precise flight control, and smoother flight.

The integrated electronic switch allows you to directly switch the image between the two cameras. PAL and NTSC formats are supported.
(This function is only supported with analog VTX)

• F743PRO: On mode activates CAM2, off mode activates CAM1;
• F745PROMINI: On mode activates CAM1, off mode activates CAM2.

The built-in 10V BEC solves the problem of VTX overheating during drone tuning.

Package:

1x GOKU H743 PRO controller;
1x cable set;
1x soft mounting kit;
1x set of screws.

Connection / Diagram: