GEPRC TAKER F722 BT 8Bit 60A STACK

Features:

• STM32F722 chip is used;
• The latest 42688-P gyroscope has been installed;
• 512 MB black box memory;
• Bluetooth parameter tuning is supported;
• Integrated LC power filter;
• Updated Type-C USB connector;
• Connects directly to DJI Air Unit;
• Simple and effective installation with anti-vibration elements ensuring stable gyroscope operation;
• Integrated barometer;
• Two independent BECs: 9V@2.5A + 5V@3A.

Specification:

GEP-F722-BT-HD V3 Flight Controller:

• MCU: STM32F722;
• IMU: ICM42688-P (SPI);
• Air Unit connection: direct connection to DJI Air Unit;
• Black box: 512 MB integrated;
• Bluetooth: Supported;
• Barometer: Supported;
• USB interface: Type-C;
• OSD: Betaflight OSD with AT7456E chip;
• BEC: 5V@3A, 9V@2.5A (two independent);
• Firmware target: GEPRCF722_BT_HD_V3;
• Dimensions: 36.9 × 36.9 mm;
• Mounting holes: 30.5 × 30.5 mm;
• Hole diameter: φ4 mm, becomes φ3 mm using a silicone anti-vibration ring;
• Input voltage: 3-6S LiPo;
• UART: 5 groups (UART4 for Bluetooth);
• Power supply filtering: integrated LC filter;
• Weight: 8.2 g.

TAKER H60_BLS 60A 4-in-1 ESC:

• Input voltage: 3-6S LiPo;
• Ammeter: Supported;
• Constant current: 60A;
• Peak current: 65A (5 seconds);
• Supported protocols: DShot 150/300/600;
• Dimensions: 42 × 45.7 mm;
• Mounting holes: 30.5 × 30.5 mm;
• Hole diameter: φ4 mm, becomes φ3 mm with silicone anti-vibration ring;
• Weight: 14.9 g;
• Firmware target: B_X_30.

Package:

1× FC controller board;
1× ESC board;
1× Capacitor;
1× O3 3-in-1 connection cable;
1× FC adapter cable;
1× SH1.0 4-pin silicone cable;
1× Camera connection cable;
1× VTX connection cable;
1× XT90 power cable;
4× M3 × 30 screws;
4× M3 × 25 screws;
8× Nylon nuts;
12× Silicone anti-vibration pads.