Flywoo GOKU F722 PRO Mini V2 Flight Controller Plug&Play O4 / O4 Pro

The new generation FLYWOO F722 PRO Mini V2 flight controller features a standard 20mm size, a powerful STM32 F722 processor, supports up to 8 motor outputs, and has two 4-in-1 ESC connectors. All ports use convenient connectors, which simplify device connection, speed up installation, and facilitate maintenance and fault diagnosis, thereby reducing the complexity of drone assembly. At the same time, all soldering pads are preserved, so users can choose to connect devices via connectors or by soldering wires directly. In addition, the controller has Plug-and-Play support for the DJI O4 Air Unit system, allowing you to quickly and easily integrate DJI's advanced digital image transmission technology into your drone design.

Features:

• STM32F722 processor is used, with an operating frequency of up to 216 MHz, ensuring faster response and smoother control;
• Integrated ICM42688 gyroscope, providing greater control accuracy and better flight stability;
• Snap-lock sockets are used, allowing components to be connected without soldering ("Plug-and-Play"), and soldering pads are left for additional flexibility;
• Integrated 16 MB data storage for recording and subsequent analysis of flight data;
• Integrated 10 V / 2 A and 5 V / 2 A BEC power supplies, ensuring stable power supply for video transmitters (VTX) and other accessories;
• Supports up to 8 motor outputs and has two reserved 4-in-1 ESC connectors, simplifying connection;
• The PCB board is manufactured using Immersion Gold technology, which increases resistance to high temperatures and high currents.

Specification:

• Flight controller: GOKU F722 PRO Mini V2;
• Betaflight software (Firmware): FLYWOO F722PROV2;
• INAV software (Firmware): FLYWOO F722PRO;
• Microcontroller (MCU): STM32F722;
• Gyroscope: ICM42688;
• OSD chip: AT7456E;
• Barometer: DPS310 / SPL06;
• Black Box memory: 16 MB;
• UART ports: UART1 / UART2 / UART3 / UART4 / UART5 / UART6;
• Input voltage: 7.4-26V (2-6S LiPo);
• BEC power supply: 10 V / 2 A and 5 V / 2 A;
• Controller dimensions: 32 x 29 x 20 mm;
• Mounting hole arrangement: M2, 20 x 20 mm;
• Weight: 9.9 g.

Measurements:

Package:

1x Flywoo GOKU F722 PRO Mini V2 Flight Controller Plug&Play O4 / O4 Pro;
1x FC and ESC connection cable;
1x buzzer connection cable;
1x GPS connection cable;
1x DJI O4 connection cable;
1x receiver connection cable;
5x M3 anti-vibration rubbers;
5x M2 anti-vibration rubbers;
1x camera connection cable.