Axisflying REX 5 SE 6S Analog ELRS

About the drone

Axisflying REX 5″ SE is a lightweight and powerful 5-inch FPV drone designed for racing and dynamic freestyle flights. The T700 carbon fiber frame ensures low weight and impact resistance, while Axisflying Argus electronics with a 6S power system provide fast response and high power. The drone is equipped with an AXIS ELRS 2.4 GHz receiver and, depending on the version, a 100 mW analog or DJI O4 Wide video system. Standardized FPV components facilitate repair and replacement of spare parts.

Features:

• Lightweight 5-inch frame – designed for fast racing and freestyle flights;
• T700 carbon fiber construction – low weight and high impact resistance;
• 6S power system – high power, instant response and high maximum speed;
• Axisflying Argus electronics – manufacturer’s flight controller and speed governor system;
• 100 mW analog video transmitter – stable video transmission in analog version;
• AXIS ELRS 2.4 GHz receiver – low latency, stable connection and good immunity to interference;
• Standardized FPV components – easier repair, maintenance and replacement of spare parts;
• Ready to fly – main electronics and receiver installed and configured at the factory.

Specification:

• Model: Axisflying REX 5 SE 6S Analog ELRS;
• Materials: T700 carbon fiber, 7075-T6 aluminum alloy, TPU, PLA;
• Distance between engines: 188.91 mm;
• FC: Argus Mini F7;
• ESC: Argus Mini 55A;
• Gyroscope: ICM-42688-P;
• Barometer: supported;
• Motors: AE2207 V2 2050KV;
• Propellers: BB39;
• RX: ELRS 2.4 GHz;
• Recommended battery: 6S LiPo 1100–1860 mAh;
• Blackbox memory: 16 MB;
• Battery connector: XT60;
• Maximum speed: 235 km/h;
• Flight time: 8–12 min.;
• Weight: 283 ± 3 g;
• Video transmitter antenna: 5.8 GHz copper antenna;
• Camera: Firefly Mini;
• VTX: analog.

Ultra-light and fast - weighing just 58g, the T700 carbon fiber frame ensures low weight, strength and extremely fast response to control. Together with specially adapted 2050KV motors, the drone has fast acceleration, stability and can reach a maximum speed of 235 km/h.

Strong and lightweight construction - the central part of the frame is made of 7075-T6 aircraft-grade aluminum, and the frame itself is made of high-strength T700 carbon fiber. This combination increases the rigidity and impact resistance of the structure, while maintaining a low weight - perfect for intensive training and racing.

The 188mm compact design – short wheelbase gives the drone extremely fast response, precise cornering and excellent maneuverability. This is especially useful when flying through race gates, making sharp turns and complex maneuvers at high speed.

The powerful Argus Mini electronics – F7 flight controller with STM32F722 processor, ICM-42688 gyroscope, barometer and 16 MB memory ensure fast and precise control. The Argus Mini 55A 4-in-1 speed controller supports up to 65 A instantaneous current and telemetry, making it perfect for powerful and dynamic flights.

Protected design for more reliable flights - special protections reduce the risk of damage to the camera lens and antenna and help maintain a stable signal. The upper "fin" design makes it easier to turn the drone over after a fall using "Turtle" mode, so you can continue flying faster.

Powerful and reliable electronics system - Argus Mini F7 flight controller combined with Argus Mini 55A speed controller ensures stable control, fast response to commands and smooth power transfer. The system is suitable for both daily training and intensive racing flights.

Package:

1x Axisflying REX 5 SE 6S Analog ELRS;
2x 5-inch three-blade propeller sets;
1x RHCP video transmitter antenna;
1x M3 hex screwdriver;
1x Non-slip battery pad;
1x Nylon battery strap;
1x Screw set for camera and frame;
1x User manual.