GEPRC TAKER F722 BT 8Bit 65A STACK

Powerful FPV drone FC and ESC kit with STM32F722 processor, ICM42688-P gyroscope, integrated barometer and 65 A 4-in-1 ESC supporting 3-8S LiPo batteries. The flight controller has a 512 MB Blackbox, LC power filter, 5 V and 12 V BEC, USB Type-C and direct connection to the DJI Air Unit.

Features:

• Uses a high-performance STM32F722 processor;
• Integrated latest ICM42688-P gyroscope;
• 512 MB Blackbox memory;
• Supports parameter configuration via Bluetooth;
• Integrated LC filter to reduce electrical interference;
• Updated USB Type-C connector;
• Comes with TAKER H65 8S BLS 65A 4-in-1 ESC, ensuring smooth flight;
• Ability to directly connect DJI Air Unit;
• Easy installation with vibration-damping mounts ensuring stable gyroscope operation;
• Integrated barometer;
• Two independent BEC power outputs: 9 V / 2.5 A and 5 V / 3 A.

Specification:

FC:

• Processor (MCU): STM32F722;
• Gyroscope (IMU): ICM42688-P (SPI);
• DJI Air Unit connector: direct connection to DJI Air Unit;
• Blackbox memory: 512 MB integrated;
• Barometer: integrated;
• USB connector: Type-C;
• OSD: Betaflight OSD with AT7456E chip;
• BEC: two independent outputs – 5 V / 3 A and 9 V / 2.5 A;
• Firmware Target: GEPRCF722_BT_HD_V3;
• Dimensions: 36.9 x 36.9 mm;
• Mounting holes: 30.5 × 30.5 mm; Ø4 mm, when using silicone vibration damping rings – Ø3 mm;
• Input voltage: 3-6S LiPo;
• UART: 5 groups;
• Power filter: integrated LC filter;
• Weight: 8.2 g.

ESC:

• Input voltage: 3-8S LiPo;
• Current measurement: supported;
• Continuous current: 65 A;
• Short-term current: 70 A (5 sec.);
• Supported protocols: DShot150 / DShot300 / DShot600;
• Dimensions: 42 x 45.7 mm;
• Mounting holes: 30.5 x 30.5 mm; Ø4 mm, when using silicone vibration damping rings – Ø3 mm;
• Weight: 14.9 g;
• Target: B_X_30.

Package:

1x GEP-F722-BT-HD V3 Flight Controller;
1x TAKER H65_8S_BLS 65A 4IN1 ESC;
1x capacitor;
1x O3 3-in-1 connection cable;
1x FC adapter cable;
1x SH1.0 4-pin silicone cable;
1x camera connection cable;
1x VTX connection cable;
1x XT60 power cable;
4x M3 x 30mm screws;
4x M3 x 25mm screws;
8x nylon nuts;
12x silicone vibration damping gaskets.