
GEPRC TAKER F722 E55A SE is a high-performance FC and ESC kit for FPV racing and high-power drones. The F722 flight controller uses a stable ICM42688-P gyroscope, has an integrated 32MB Flash memory, and supports both soldered and SH1.0 connector connections. TAKER E55_96K BL32 4IN1 ESC uses metal-cased MOSFETs and supports up to 50A continuous and 55A instantaneous current. The compact 25.5 x 25.5 mm mounting ensures compatibility with most FPV drone frames and effective heat dissipation.
Features:
• New TAKER series – high-performance FC and ESC system, tested with 2306.5 1350KV motors and 7.5 inch drone, ensuring stable performance;
• Uses the popular F722 main controller and ICM42688-P gyroscope;
• Integrated 32 MB Blackbox memory;
• Supports receiver, analog camera and direct connection of DJI Air Unit;
• Integrated two independent BECs: 10 V / 2 A and 5 V / 2.5 A;
• 25.5 x 25.5 mm mounting holes, compatible with most AIO type frames on the market;
• TAKER E55_96K BL32 4IN1 55A ESC uses metal-cased MOSFETs, ensuring more efficient heat dissipation and stable operation.
Specification:
FC:
• Model: TAKER F722 SE FC;
• Microcontroller (MCU): STM32F722RET6;
• Gyroscope (IMU): ICM42688-P;
• Blackbox memory: 32 MB Flash;
• USB connector: USB Type-C;
• OSD: Betaflight OSD with AT7456E chip;
• BEC outputs: 5 V / 2.5 A and 10 V / 2 A;
• Software Target: TAKERF722SE;
• Dimensions: 31.7 x 31.5 mm;
• Mounting holes: 25.5 x 25.5 mm, Ø4 mm;
• Supply voltage: 7.4-25.2V (2-6S LiPo);
• UARTs: 6 UARTs;
• Power filter: integrated LC filter;
• Weight: 6.0 g.
ESC:
• Model: TAKER E55_96K BL32 4IN1 ESC 55A;
• Supply voltage: 7.4-25.2V (2-6S LiPo);
• Current measurement: supported;
• PWM frequency: 24-96 kHz;
• Continuous current: 55 A;
• Maximum instantaneous current: 60 A (5 sec.);
• Telemetry: supported;
• Supported protocols: Oneshot125, Oneshot42, Multishot, DShot150, DShot300, DShot600;
• Software Target: ST_G0_05;
• Weight: 9.6 g.
Measurements:


The optimal combination of the F722 main controller and the ICM42688-P gyroscope, proven in long-term practice and ensuring high performance and stable operation.

55A ESC with metal-cased MOSFETs ensures more efficient heat dissipation and more stable operation.

Plug & Play connectors for convenient connection of external devices allow you to easily connect the ESC, camera, DJI Air Unit and receiver.
Package:
1x TAKER F722 SE FC;
1x TAKER E55_96K BL32 4IN1 ESC 55A;
1x 35V 470µF capacitor;
1x XT60 power cable;
1x 8-pin FC–ESC connecting cable;
4x M3 × 22 mm screws;
6x M3 lock nuts;
12x 4→3 mm vibration-damping silicone bushings;
12x 4→2 mm vibration-damping silicone bushings;
1x 65 mm camera cable;
1x 25 mm camera cable;
1x receiver cable;
1x DJI Air Unit connecting cable.


































































































Reviews
There are no reviews yet.