GEPRC GEP-Vapor O4 Pro Holographic White frame

The GEPRC Vapor O4 Pro Chameleon White retains the proven and pilot-favorite Vapor series design, but features a new chameleon-effect coating that changes color depending on the lighting. The hard protective layer gives the frame greater resistance to scratches, wear, and corrosion.

Features:

• 5 mm thick carbon fiber beams ensure excellent rigidity of the entire frame;
• The camera's side plates and front frame provide double protection against impacts;
• Quick-disassembly design facilitates drone maintenance and repair;
• Updated aluminum camera mount perfectly adapted to the DJI O4 Air Unit Pro system;
• New „mecha“ style side plates give the frame a distinctive, aggressive look;
• The rear VTX antenna mount is compatible with both the original O4 Pro antenna and SMA adapters;
• Classic Vapor frame geometry preserved – new look, same flying character.

Specification:

Vapor-D5 O4 Pro frame:

• Model: GEP-Vapor-D5 O4 Pro Holographic White;
• Distance between motors: 238.4 mm;
• Top plate thickness: 2.0 mm;
• Thickness of the middle plate: 2.0 mm;
• Beam thickness: 5.0 mm;
• Bottom plate thickness: 2.5 mm;
• FC mounting holes: 20 x 20 mm / 30.5 x 30.5 mm;
• VTX mounting holes: 20 x 20 mm / 25 x 25 mm / 30.5 x 30.5 mm;
• Motor mounting holes: 16 x 16 mm;
• Camera mount size: 19 mm / 20 mm;
• Recommended propellers: 5 inches;
• Weight: 219.8 ± 5 g.

Vapor-X5 O4 Pro frame:

• Model: GEP-Vapor-X5 O4 Pro Holographic White;
• Distance between motors: 230 mm;
• Top plate thickness: 2.0 mm;
• Thickness of the middle plate: 2.0 mm;
• Beam thickness: 5.0 mm;
• Bottom plate thickness: 2.5 mm;
• FC mounting holes: 20 x 20 mm / 30.5 x 30.5 mm;
• VTX mounting holes: 20 x 20 mm / 25 x 25 mm / 30.5 x 30.5 mm;
• Motor mounting holes: 16 x 16 mm;
• Camera mount size: 19 mm / 20 mm;
• Recommended propellers: 5 inches;
• Weight: 213.6 ± 5 g.

Measurements:

Vapor-X5 O4 Pro frame:

Vapor-D5 O4 Pro frame:

Holographic pink gradient finish – the frame subtly changes shade depending on the lighting, and the protective coating increases resistance to scratches and wear.

Improved and stronger Vapor construction - 5mm carbon fiber beams provide high rigidity, reinforced front section better protects the camera, and quick-disassembly design facilitates repair and maintenance. Updated aluminum camera mount adapted to DJI O4 Air Unit Pro, rear antenna mount supports O4 Pro antenna and SMA adapters.

Package:

4x carbon fiber beams;
1x top plate;
1x bottom plate;
1x middle plate;
1x pair of VTX mounting plates;
1x front protective plate;
1x beam fixing plate;
1x DJI O4 Pro 7075 aluminum camera mount set (L/R);
1x capacitor holder;
2x pairs of landing gear;
1x RX antenna holder;
1x VTX antenna mount;
1x VTX SMA antenna mount;
1x receiver holder;
1x GoPro mount;
1x GPS holder;
1x DJI O4 80° silicone camera damper pair;
2x 20 x 250 mm battery straps;
2x non-slip battery pads;
1x set of spare screws;
1x set of 3D printed parts;
1x 4-in-1 hex screwdriver;
1x M8 ratchet wrench.