GEPRC TAKER F722 BLS 60A V2 STACK

GEPRC TAKER F722 BLS 60A V2 STACK is a powerful FPV drone flight controller and 4-in-1 ESC kit with STM32F722 processor, ICM42688-P gyroscope, 16 MB Blackbox, Betaflight OSD and USB Type-C connector. The 60 A ESC supports 3-6S LiPo batteries and DShot150/300/600 protocols, while the standard 30.5 x 30.5 mm mount and DJI Air Unit connector ensure convenient integration into various FPV designs.

Features:

• The popular STM32F722 processor is used;
• Integrated latest generation ICM42688-P gyroscope;
• 16 MB Blackbox memory for flight data;
• Integrated LC filter to help reduce electrical interference;
• Updated USB Type-C connector;
• Ability to directly connect DJI Air Unit;
• Comes with TAKER H60 BLS 60A 4-in-1 ESC, ensuring smooth and precise drone control;
• Simple installation and anti-vibration elements ensure stable operation of the gyroscope;
• Two independent BEC outputs: 9 V / 2.5 A and 5 V / 3 A.

Specification:

FC:

• MCU: STM32F722;
• IMU: ICM42688-P (SPI);
• DJI Air Unit connector: direct connection;
• Blackbox memory: 16 MB integrated;
• USB connector: Type-C;
• OSD: Betaflight OSD with AT7456E chip;
• BEC: 5V/3A and 9V/2.5A;
• Software Target: GEPRCF722;
• Dimensions: 36.85 x 36.85 mm;
• Mounting holes: 30.5 × 30.5 mm, Ø4 mm (with silicone anti-vibration rings – Ø3 mm);
• Input voltage: 3-6S LiPo;
• UARTs: 5;
• Power filter: integrated LC filter;
• Weight: 8.1 g.

ESC:

• Input voltage: 3-6S LiPo;
• Current measurement: supported;
• Continuous current: 60 A;
• Maximum short-term current: 65 A (5 sec.);
• Supported protocols: DShot150 / DShot300 / DShot600;
• Dimensions: 42 x 45.7 mm;
• Mounting holes: 30.5 × 30.5 mm, Ø4 mm (with silicone anti-vibration rings – Ø3 mm);
• Weight: 14.9 g;
• Firmware Target: B_X_30.

Package:

1x GEP-F722-HD v2 Flight Controller;
1x TAKER H60_BLS 60A 4IN1 ESC;
1x capacitor;
1x DJI Air Unit adapter cable;
1x flight controller adapter cable;
1x XT60 power cable;
4x M3 x 30mm screws;
4x M3 x 25mm screws;
8x nylon nuts;
8x silicone anti-vibration bushings;
2x SH1.0 4-pin silicone wires;
1x camera connection cable.