SECURE H743 V2 & E70 G1 4-8S 70A Stack

ESC Features:

• It uses a high-quality STM32G071 processor, supporting BLHeli_32 or AM32 software, a 2-8S voltage range, a continuous current of 70A and a peak current of 150A;
• Integrated galvanometer that supports telemetry and transmits motor speed, temperature, current and other information in real time;
• High-quality MOSFET transistors ensure efficient power conversion, lower losses and longer flight time;
• Multi-layer PCB with increased copper thickness improves current conduction and cooling properties, so the ESC is not afraid of load;
• Precisely controlled switching interval accelerates ESC response, providing smooth and precise control;
• PWM frequency 16-128 kHz supported;
• Innovative diagonally positioned solder contacts improve wire placement and reduce soldering complexity;
• 20×20 mm mounting hole pattern, compact size, suitable for various types of frames.

FC Features:

• Equipped with a high-end STM32H743 processor with an operating frequency of up to 480 MHz, the response is extremely fast and accurate;
• Uses ICM42688P gyroscope, ensuring accurate motion capture and stable control, which improves the reliability of the entire system;
• The SEQURE H743 has a built-in barometer, OSD module and 16 MB black box memory, which allows for efficient recording of flight data;
• 6 UART ports are left to meet the connection needs of most devices;
• Controls up to 8 motors, making it easy to create an X8 configuration;
• Equipped with a plug-in connector and dual BEC outputs, providing independent 10V power supply, allowing direct connection of DJI O3/O4/O4 Pro and analog VTXs;
• Supports wide voltage 4-8S Lipo power supply, has 20mm and 30.5mm mounting holes. Compact design is suitable for racing, filming, freestyle and other drones.

Specification:

FC:

• Product name: SEQURE H743 V2;
• Processor: STM32H743;
• Gyroscope: ICM-42688-P;
• Barometer: BMP280 / DPS310 / DPS368;
• OSD chip: AT7456E;
• Black box: 16 MB memory;
• Supported software: Betaflight (default), INAV, ArduPilot;
• Firmware name: SEQUREH7V2;
• Input voltage: 4-8S Lipo/LiHV;
• BEC outputs: 5 V / 2.5 A; 10 V / 2 A;
• UART ports: 6;
• Motor control: M1–M8;
• LED: WS2812 LED strip;
• Buzzer: Yes;
• ESC telemetry: RX8;
• USB connector: Type-C;
• Mounting holes: 20×20 mm (Φ4 / M3) and 30.5×30.5 mm (Φ4 / M3);
• Dimensions: 36.5 × 36.5 × 6 mm
• Weight: 7.3 g.

ESC:

• Product name: E70 G1;
• Processor: STM32G071;
• PWM frequency: 16-128 kHz;
• Operating voltage: 2-8S Lipo/LiHV;
• Continuous current: 70 A;
• Maximum current: 150 A;
• Supported protocols: Dshot600/300/150, Oneshot, Multishot, PWM;
• Firmware support: BLHeli_32, AM32;
• Telemetry: Yes;
• Galvanometer: Yes;
• BEC: None;
• Mounting holes: 20×20 mm (Φ4 / M3);
• Dimensions: 50.5 × 36 × 6 mm;
• Weight: 15.8 g.

Package:

1x SEQURE H743 V2 FC;
1x E70 G1 4in1 ESC;
1x 30AWG 40mm SH1.0-8P flat cable;
2x 30AWG 100mm SH1.0-4P flat cable
1x 60 mm 12095 5V buzzer;
10x M3 × 8 mm silicone anti-vibration gaskets (black);
2x 12AWG 100 mm power wires (black/red);
1x XT60H-M black plug;
1x 35V 680 µF solid capacitor;
4x M3 × 25mm screws;
4x M3 washers.

Connection diagram: