SECURE H743 V2 ICM42688P FC 4-8S Dual BEC

SEQURE H743 V2 is a powerful and versatile flight controller for FPV freestyle, racing, aerial photography and X8 drones. It uses the STM32H743 480 MHz processor and ICM42688P gyroscope, ensuring fast and stable control. The controller has an integrated barometer, OSD, 16 MB Blackbox memory, 6 UART interfaces and supports up to 8 motors. Two BEC outputs and a separate 10 V power supply allow you to conveniently connect a DJI O3/O4/O4 Pro or analog VTX. It supports 4-8S LiPo power and 20 x 20 mm and 30.5 x 30.5 mm mounting holes.

Features:

• Equipped with a high-performance STM32H743 processor operating at a frequency of up to 480 MHz, ensuring fast control response;
• The ICM42688P gyroscope is used, which ensures accurate determination of the drone's position and movements and stable control, thus increasing the reliability of the system;
• SEQURE H743 has a built-in barometer, OSD and 16 MB Blackbox memory for recording flight data;
• The board has 6 UART interfaces, so it is possible to connect most devices used in FPV systems;
• Supports control of up to 8 motors, making it easy to configure an X8-type drone;
• Integrated connectors and two BEC power outputs. A separate 10V output allows direct connection and power to DJI O3, O4, O4 Pro and analog VTX transmitters.

Specification:

• Model: SEQURE H743 V2;
• Processor: STM32H743;
• Gyroscope: ICM-42688-P;
• Barometer: BMP280 / DPS310 / DPS368;
• OSD chip: AT7456E;
• Blackbox memory: 16 MB;
• Software: Betaflight (default), INAV, ArduPilot;
• Firmware name: SEQUREH7V2;
• Input voltage: 4-8S LiPo / LiHV;
• BEC outputs: 5 V / 2.5 A, 10 V / 2 A;
• UART interfaces: 6;
• Motor control: M1–M8 (up to 8 motors);
• LED: WS2812 LED strip support;
• Buzzer: supported;
• ESC telemetry: RX8;
• USB connector: USB Type-C;
• Mounting holes: 20 x 20 mm, Ø4 mm / M3 and 30.5 x 30.5 mm, Ø4 mm / M3;
• Dimensions: 36.5 x 36.5 x 6 mm;
• Weight: 7.3 g.

Measurements:

Package:

1x SEQURE H743 V2 FC;
1x 30AWG 40mm Reverse Double Headed SH1.0-8P Flat Cable;
2x 30AWG 100mm Single-head SH1.0-4P Flat Cable;
1x 60mm Length 12095 5V Buzzer;
5x M3*8mm Shock-absorbing Ball(Black);
5x M3*6.6mm Shock-absorbing Ball(Black).

Connection/diagram: