CaddxFPV Gofilm 20 ELRS 2.4Ghz

This is the first CaddxFPV FPV drone designed to meet the needs of most pilots, and the first 4K starlight drone on the market, providing excellent viewing even in low light.

Avatar Moonlight equipment

GOFILM 20 equipment

Specification:

Drone

• Model: Gofilm 20;
• Flight Controller (FC): CADDXF4_AIO_ELRS;
• Video transmission device (VTX): Moonlight Kit;
• Wheelbase: 94 mm;
• Motors: 1303 6000KV;
• Screws: HQprop T2×2×3;
• Weight: 115 ±5 g;
• Size: 133 × 123 × 39 mm;
• Flight time: about 5.5 minutes;
• Receiver: ELRS 2.4G;
• Battery connector: XT30.

FC parameters:

• MCU: STM32F405RGT6;
• Gyroscope and IMU: ICM42688;
• Barometer: BMP280;
• ExpressLRS receiver: ELRS V3.0 UART;
• ESC: 20A 4-IN-1;
• Blackbox: 8 MB;
• Supported voltage: 3~4S LiPo/LiHV;
• Mounting hole spacing: 25.5 × 25.5 mm;
• Firmware target: CADDXF4_AIO_ELRS.

VTX parameters:

• Model: Moonlight Kit;
• Firmware name: AvatarMoonlight_Sky_X.XX;
• Communication frequency: 5.725–5.850 GHz;
• Transmitter power (EIRP): FCC: <30 dBm; CE: <14dBm; SRRC: <20dBm; MIC: <25dBm;
• I/O interface: JST1.04 (power cable); JST0.86 (USB); microSD card slot; IPEX-1;
• Sensor: Starlight sensor;
• FOV: Max. 160°;
• Range: F2.1;
• Shutter type: Rolling shutter;
• ISO: 100-25600;
• Recording resolution: 4K@30/60fps; 2.7K@30/60fps; 1080p@100/60fps; 720p@60fps;
• Max Mbps: 150 Mbps;
• Video format: MP4 (H.264);
• 3D DNA: Supported;
• Gyro Flow: Supported;
• Built-in EIS: Supported;
• Wide power supply range: 7.4V–25.2V;
• Power consumption: 12V@1.4A, 8V@2.2A;
• Memory card type: U3 microSD, max. 256 GB;
• Camera size: 19.6 × 19 × 24 mm;
• VTX size: 15.3 × 34.5 × 34.5 mm;
• VTX mounting holes: 20 × 20 mm / 25 × 25 mm (M2);
• Weight: 38.5 g (without antenna);
• OSD: Canvas mode;
• Latency: average 22 ms;
• Antennas: 2 (IPEX).

Package:

1x CaddxFPV Gofilm 20 drone;
4× M2*6mm screws;
4× M2*8mm screws;
1× 1.5mm Allen key;
1× USB data cable;
1× 180 mm strap;
1× Set of screws;
1× Micro USB data cable;
1× User manual.