
FLYWOO Explorer LR 4 V2 Frame Kit is a lightweight 4-inch FPV drone frame kit for self-assembly of a long-range drone. The updated V2 design features a camera vibration damping system with four rubber shock absorbers and is compatible with DJI O3, O4 Wide, O4 Pro and Walksnail Pro video transmission systems. The frame provides space for the flight controller (FC), speed controller (ESC), video transmitter (VTX), GPS module and FLYWOO Finder, while maintaining low weight and convenient maintenance.
Features:
• Lightweight 52g frame kit for 4-inch Long Range FPV drones;
• Updated V2 camera vibration damping system with four rubber shock absorbers;
• Compatible with DJI O3, O4 Wide, O4 Pro and Walksnail Pro video transmission systems;
• Camera mounting width: 20 × 20 mm;
• Motor mounting holes: Ø9 mm and Ø12 mm;
• FC + ESC mounting hole layout: 16 × 16 mm and 20 × 20 mm;
• VTX mounting hole layout: 16 × 16 mm, 20 × 20 mm and 25.5 × 25.5 mm;
• Mounting points for the GPS module and FLYWOO Finder;
• The kit includes TPU holders, straps, protective pads, vibration damping parts and mounting elements.
Specification:
• Model: Explorer LR 4 V2 Frame Kit;
• Type: 4 inch Long Range FPV Drone Frame Kit;
• Frame weight: about 52 g;
• Camera construction: V2 vibration damping system with 4 rubber shock absorbers;
• Camera size: 20 × 20 mm;
• Compatible video systems: DJI O3, O4 Wide, O4 Pro, Walksnail Pro;
• Motor mounting holes: Ø9 mm / Ø12 mm;
• FC + ESC mounting holes: 16 × 16 mm / 20 × 20 mm;
• FC + ESC installation space: about 19.5mm (height) × 32.5mm (width);
• VTX mounting holes: 16 × 16 mm / 20 × 20 mm / 25.5 × 25.5 mm;
• VTX installation space: approx. 19.5 mm (height) × 43 mm (width);
• Additional mounting locations: for GPS module and sounder / FLYWOO Finder;
• Recommended accessories: FLYWOO Finder V1.0 and GOKU GM10 Mini GPS.
Measurements:


The FLYWOO Explorer LR 4 V2 frame is made of carbon fiber panels, front and rear arms, and TPU mounts. The modular design weighing only 52g ensures convenient assembly and easy repair. The updated V2 camera vibration damping system with four rubber shock absorbers reduces vibration transmission to the camera and helps to obtain a more stable image. The frame supports 20 × 20 mm cameras and is compatible with DJI O3, O4 Wide, O4 Pro, and Walksnail Pro video transmission systems.

The FLYWOO Explorer LR 4 V2 frame features a compact design and conveniently located places for electronic components. The FC and ESC installation space is 19.5 × 32.5 mm, supporting 16 × 16 mm and 20 × 20 mm mounting holes, and the VTX installation space is 19.5 × 43 mm with 16 × 16 mm, 20 × 20 mm and 25.5 × 25.5 mm mounting holes. The frame is compatible with DJI O4 Wide, O4 Pro and Walksnail Avatar Pro video systems, and the recommended flight controller and speed controller set is GOKU F722 Mini 45A Stack. The rear part of the frame also has spaces for a GPS module and sonar, recommending GOKU GM10 Mini GPS and FLYWOO Finder V1.0.
Package:
1x Top frame plate;
1x Central frame plate;
1x Bottom frame plate;
2x Camera vibration damping plate;
2x Camera shock absorber support plate;
2x Front frame arm;
2x Rear frame arm;
2x Side arm support;
1x TPU camera holder;
1x TPU TBS antenna holder;
1x TPU ELRS antenna holder;
1x TPU GPS holder;
1x TPU Finder holder;
4x Rubber camera shock absorber;
1x TPU DJI O4 Pro camera protector;
1x TPU dual VTX antenna mount;
1x Single VTX antenna mount;
4x TPU engine protection;
2x Battery mounting strap (15 × 180 mm);
1x Fiberglass DJI O4 Air Unit protective plate;
2x Non-slip battery pad;
2x ESC isolation pad.





























































































Reviews
There are no reviews yet.