GEPRC TAKER H743 MINI 32Bit 60A STACK

TAKER H743 MINI 32Bit 60A Stack is a next-generation GEPRC mini flight controller and ESC kit with STM32H743VIH6 (Cortex-M7) processor, ICM42688-P gyroscope and TAKER H60 MINI 60A 4-in-1 ESC. Supports 3-8S LiPo batteries, uses AM32 software, high-quality MOSFET transistors and TVS protection, ensuring stable, accurate and reliable drone operation.

Features:

• Integrated ICM42688-P gyroscope;
• Supports external gyro clock signal;
• Integrated 16 MB Blackbox memory;
• Supports wireless configuration via Bluetooth;
• Integrated barometer;
• 8 motor outputs, supports X8 configuration;
• Two independent BECs: 12 V / 2.5 A + 5 V / 3 A;
• Integrated TVS protection against voltage surges.

Specification:

FC:

• Model: TAKER H743 MINI;
• Processor (MCU): STM32H743;
• Gyroscope (IMU): ICM42688-P;
• DJI Air Unit connection: DJI Plug & Play;
• Blackbox memory: 16 MB integrated;
• Bluetooth: supported;
• BEC outputs: 5 V / 3 A, 12 V / 2.5 A;
• USB connector: Type-C;
• OSD: Betaflight OSD AT7456E;
• Barometer: supported;
• Firmware: GEPRC TAKER H743 MINI;
• Input voltage: 3-8S LiPo;
• Dimensions: 31 x 31 mm;
• Fastening: 20 x 20 mm;
• Power supply filtering: integrated LC filter;
• UART: 7 (UART8 reserved for Bluetooth);
• Weight: 6.1 g.

ESC:

• Model: TAKER H60 MINI AM32 60A 4IN1 ESC;
• Input voltage: 3-8S LiPo;
• Continuous current: 60 A;
• Maximum current: 65 A (5 sec.);
• Protocols: DShot150 / 300 / 600;
• Dimensions: 43 x 36 mm;
• Weight: 17 g (with aluminum radiator);
• Fastening: 20 x 20 mm;
• Firmware: AM32 GEPRC 4IN1 F421.

The high-performance STM32H743VIH6 processor with Cortex-M7 operates at 480 MHz, ensuring fast data processing and stable flight. The controller comes with Betaflight software installed, with INAV and ArduPilot support planned for the future.

ICM42688-P gyroscope with high PSRR LDO filtering effectively reduces power supply interference and ensures more stable operation. External gyro clock signal is supported with Betaflight 2025.12.1 or later.

The switchable 12V BEC output can be controlled by a remote switch or via the configurator. It provides stable power to the VTX and supports automatic standby mode to help protect the video transmitter from overheating.

Built-in Bluetooth allows you to wirelessly configure and adjust drone settings using the Betaflight mobile app - convenient for making quick changes on the fly.

The integrated 16 MB Blackbox memory allows you to record and analyze flight data and supports multiple software platforms.

„Plug & Play connectors according to the Betaflight Jet standard allow for quick and convenient connection of receiver, GPS and other UART devices without additional soldering.

The TAKER H60 MINI 32-bit 60A ESC supports 3-8S LiPo batteries, uses AM32 software, and has a standard 20 x 20 mm mounting.

The updated ESC hardware ensures greater reliability and stability. An efficient aluminum heatsink improves heat dissipation, high-end MOSFET components ensure reliable power management, a PCB with up to 3 oz copper thickness allows for higher currents, and integrated TVS protection protects against sudden voltage spikes.

Integrated dual BEC power supplies, a barometer, and a switchable 12V/BAT output provide more connectivity and power options. The controller also has 8 motor outputs and supports X8 configuration.

Package:

1x TAKER H743 MINI flight controller;
1x TAKER H60 MINI 32-bit ESC;
1x 50V 1000µF capacitor;
1x DJI Air Unit cable (SH1.0-6P);
1x FC cable (SH1.0-8P);
1x FC–GPS/RX cable (SH1.0-4P);
1x XT60 power cable (12AWG, 55 mm);
10x M3 silicone anti-vibration bushings;
5x M3x22 mounting screws;
6x M3 nylon lock nuts;
5x M3 hex nuts.