Flywoo Firefly16 1S Nano Baby V3 O4 Wide Tiny Drone ERLS

Flywoo Firefly16 1S Nano Baby V3 O4 Tiny Drone is an ultra-lightweight micro FPV drone with an integrated DJI O4 digital video transmission system. Its compact design, low weight, and excellent handling make it ideal for flying both indoors and outdoors in calm weather conditions. The DJI O4 system ensures sharp, low-latency images, providing a high-quality FPV experience for both beginners and experienced pilots.

Features:

• Ultra-light and compact micro FPV drone;
• Designed specifically with support for the DJI O4 digital imaging system;
• Ensures high-quality, stable digital video transmission;
• Adjustable camera angle to adapt to your flight style;
• GOKU F405 HD 1S AIO flight controller;
• ROBO 1002 23500KV motors provide good thrust;
• HQ 40 mm three-blade propellers;
• DJI O4 Air Unit allows you to obtain 4K 60 fps digital HD images;
• Optimal balance of flight time and efficiency with 1S battery;
• Light weight;
• TPU motor mounts increase structural durability;
• The kit includes battery holders, ND filter and accessories for convenient use.

Specification:

• Model: Firefly16 1S Nano Baby V3 O4 Tiny Drone;
• Frame: Firefly16 1S Nano Baby V3 O4 frameset;
• FC: GOKU F405 HD 1S 5A AIO with TXCO ELRS support;
• VTX: DJI O4 Air Unit;
• Camera: Flywoo O4 Wide camera;
• Propellers: HQ 40 mm three-blade;
• Motors: ROBO 1002 23500KV;
• Battery connector: A30;
• Weight: 38.9.

Measurements:

Firefly18 and Firefly16 model comparison table

Key improvements:

• Optimized design, specially adapted for 1S DJI O4 low voltage stable power supply;
• 2.6g ultra-light F405 1S AIO controller;
• Plug & Play type motors (easy connection);
• No image jello;
• RockSteady stabilization supported;
• A30 connector;
• Supports up to 15 A current (PH2.0 only supports up to 4.5 A);
• 1002 engines and HQ propellers;
• New ultra-light propeller guards – 23% lighter;
• V2 propeller protection, weight only 1 g;
• Professional adjustment;
• Replaceable 1S battery holder;
• Cooling structure design.

This drone is optimized for the DJI O4 digital system and designed to maximize the capabilities of the DJI O4 Air Unit using a 1S battery. The Firefly16 version focuses on greater maneuverability, while the Firefly18 focuses on greater power and stability, allowing the pilot to choose a model according to their flying style. The integrated Flywoo O4 1S BEC power module ensures a stable 5 V / 3 A power supply even at extremely low voltages - down to 2.65 V. This allows the DJI O4's video system and flight controller to operate continuously throughout the flight, ensuring reliable operation, stable images, and safe flight.

This 1S AIO and power system is designed for reliable micro FPV drone performance. Adjustable camera angle from 5° to 20° allows you to adapt to different flight styles. ROBO 1002 motors, compatible with 45mm two-blade or 40mm three-blade propellers, provide a good balance of power and efficiency and a flight time of 4-5 minutes. The ultra-light GOKU F405 HD 1S AIO controller (2.6g) provides stable control, and TPU motor mounts protect the structure from damage.

With RockSteady stabilization enabled, the image becomes completely smooth - without the "jello" effect or vibrations, and recordings are recorded in 4K resolution at 60 frames per second.

The V3 battery compartment features an improved locking mechanism that makes it easier to use and securely attaches the battery. The design is optimized for quick swapping of 450 mAh and 750 mAh batteries and secures them during flight.

Package:

1x Firefly16 1S Nano Baby V3 O4 Tiny Drone;
1x USB data cable for DJI O4 Air Unit (90° Type-C connector);
1x 1S 450 mAh battery TPU holder;
1x 1S 750 mAh battery TPU holder;
1x O4 ND4 filter;
8x 40 mm three-blade propellers;
1x Screwdriver;
1x Fastener set.