Discover the next generation of BETAFPV-ready drones – the Aquila20 HD FPV kit with the advanced HD digital video system P1. This model is based on the successful Aquila series, offering a sharper and more stable flight. The Aquila20 HD whoop drone transmits crystal-clear Full HD images, while the 2S motor system provides more power, better control and stability in the air. You can fly up to 10 minutes on a single charge, and 3 flight modes allow you to grow from beginner to advanced pilot. The kit includes everything you need: the drone, LiteRadio 4 SE remote control and VR04 HD FPV goggles – Unpack and enjoy stunning views.

Features:
• Complete HD FPV kit – includes drone, HD FPV goggles and remote control, ready to fly right away;
• P1 HD VTX system – 1080p@60fps image, ~60 ms delay, up to 400 m communication distance;
• 2S engine system – powerful, smooth and stable flight;
• Up to 10 minutes of flight time – smart battery for longer use;
• 3 flight modes – from beginner to expert;
• Stable Hover – automatic altitude hold;
• Auto-Flip function – one-button rollover recovery;
• VR04 HD FPV goggles – suitable for those wearing prescription glasses;
• HD video recording – with the push of a button;
• Sturdy frame – resistant to impacts and drops.
Specification:
• Product: Aquila20 HD FPV Kit (P1 HD VTX);
• FPV goggles: VR04 HD FPV goggles;
• Control panel: LiteRadio 4 SE;
• Video transmission power and distance: 200 mW, over 400 m;
• Control protocol: ExpressLRS 2.4G V3;
• Camera angle adjustment: 10°–30°;
• CMOS sensor: 1/2.9″;
• Field of view (FOV): 170°;
• Flight controller: Aquila20 V1.0;
• Propellers: Gemfan 2218, 3 blades;
• Motors: 1103 | 10500KV;
• Battery: Aquila20 2S HV 1100 mAh;
• Charger: 2S HV charger with voltage tester (BT3.0);
• Axle distance: 100 mm;
• Frame material: PA plastic;
• Flight modes: N / S / M;
• Flight time: about 10 min;
• Carpet weight: 127 ±1 g.
Immersive digital HD experience
Enter a new era of FPV with the revolutionary digital system of the Aquila20 HD. Experience a huge leap from analog to crystal-clear digital, where every detail is visible in stunning 1080p resolution at 60fps.

The ArtLynk system is a low-latency, long-range communication protocol for drones, which is more stable and powerful than traditional analog VTX. The system allows for real-time HD video transmission with ~60ms latency, ensuring smooth control and high-quality FPV video. The system uses the Artosyn AR803X chip, and the core technology is supported by KAP, ensuring compatibility between different FPV devices.

The camera with a 1/2.9″ CMOS sensor and a wide 170° viewing angle captures sharp, detailed images in a variety of lighting conditions and supports 1080p recording. The wider perspective provides better orientation in the air, allowing you to see more of your surroundings and fly more confidently, enjoying high-definition images.

Learn with confidence, fly like a pro
The Aquila20 HD is designed to grow with you. Its proprietary flight controller and 3 modes (N/S/M) allow you to start off stable and gradually progress to full aerobatic control. Altitude hold and stable hover
(N Mode): The accurate barometer automatically maintains altitude and allows the drone to hover stably in place. This is a safe mode for learning, orientation in the air, and calm landing in emergency situations.

Professional modes (S and M)
For when you're ready to take things further, these modes disable all assist systems and give experienced pilots complete, precise control – for loops, flips and precision maneuvers.

Turtle mode
If the drone flips over, with one button on the remote control, the motors automatically flip it back onto its feet so you can take off again immediately - no need to go pick it up with your hands.

Aquila20: safe start, longer flights
Up to 10 minutes of flight time and a powerful 2S system. Experience the ideal balance of power and endurance. The improved 2S motor system provides maneuverable power and allows you to fly for up to 10 minutes, giving you more time to improve. The innovative inverted duct design improves traction and provides exceptional stability, while maintaining easy-to-control flight even for beginners. Fly longer and more confidently - this combination of power and efficiency makes learning smoother and more enjoyable.

Built to withstand impact
The Aquila20 HD features a PA410 frame that absorbs and dissipates impact energy, significantly reducing the risk of damage after drops. The drone's construction protects the camera and critical internal components.

Smart energy – smarter flights
The advanced Smart Battery gives the Aquila20 HD optimized performance. The built-in control chip ensures efficient power distribution and automatic protection, while clear LED indicators and low battery warnings let you always know the remaining power level.

VR04 HD FPV Goggles
Comfortable glasses with a space for prescription glasses, a contoured face cushion and a soft nose pad effectively block out light. The 2600 mAh battery provides up to 3 hours of operation, and one-button recording allows you to save HD footage directly to a micro SD card.

LiteRadio 4 SE control panel
The included LiteRadio 4 SE is a compact 8-channel remote control that is perfect for beginners and provides precise drone control. Advanced controls provide smooth and long-lasting performance, while Bluetooth wireless connectivity makes it easy to practice FPV simulators via computers, tablets, and phones. The built-in 1S 2000 mAh battery provides over 8 hours of operation (at 25 mW), and the 15 W fast charge fully charges in about 40 minutes.

Aquila20 HD vs. Aquila20 analog version
| Feature | Aquila20 HD FPV | Aquila20 analog |
|---|---|---|
| Set | Aquila20 HD FPV Kit | Aquila20 FPV Kit |
| FPV goggles | VR04 HD FPV Goggles | VR04 FPV Goggles |
| Camera | P1 VTX camera (1/2.9″ CMOS) | C04 (1/3″ CMOS) |
| VTX | P1 HD VTX | Aquila20 analog VTX |
| VTX power and distance | 200 mW, over 400 m | 350 mW, over 200 m |
| Axle distance | 100mm | 100mm |
| Flight controller | Aquila20 V1.0 | Aquila20 V1.0 |
| Control panel | LiteRadio 4 SE | LiteRadio 4 SE |
| Battery | Aquila20 2S HV 1100mAh | Aquila20 2S HV 1100mAh |
| Charger | 2S HV with voltage tester (BT3.0) | 2S HV with voltage tester (BT3.0) |
| Screws | Gemfan 2218, 3 blades | Gemfan 2218, 3 blades |
| Engines | 1103 | 10500KV | 1103 | 10500KV |
| Management protocol | ExpressLRS 2.4G V3 | ExpressLRS 2.4G V3 |
| Camera angle | 10°–30° | 10°–30° |
| Flight modes | N / S / M | N / S / M |
| Flight time | about 10 minutes | about 10 minutes |
| Carpet weight | 127 ±1g | 122 ±1g |
Package:
1x Aquila20 HD brushless whoop drone;
1x LiteRadio 4 SE control panel;
1x VR04 HD FPV goggles;
2x Aquila20 2S HV 1100 mAh batteries;
2x 18650 2600mAh batteries;
1x 2S HV charger with voltage tester (BT3.0 connector);
4x Gemfan 2218 3-blade propellers;
1x USB-C cable;
1x Screw removal tool;
1x Phillips screwdriver;
1x 4 pin adapter cable;
1x USB Type-C adapter board;
1x Portable storage bag;
1x User manual.


















































































Reviews
There are no reviews yet.