SpeedyBee Bee25 PRO Version frame

SpeedyBee Bee25 PRO Wireless Tuning Frame is a compact and very well-designed 2.5-inch cinewhoop type FPV frame designed for smooth, stable and safe flight in confined spaces and close to objects. The protective propeller ring increases safety and reduces the risk of damaging the drone or surrounding objects. The frame supports modern VTX solutions, including the DJI O3 Air Unit, and has enough space for electronics and a battery, despite its extremely compact dimensions. The Wireless Tuning concept allows for convenient configuration of the drone without wires, and carefully selected mounting solutions ensure quick and reliable assembly.

Features:

• Designed for 2.5 inch FPV drones;
• Integrated wireless debugging concept – convenient configuration and testing
• Strong yet lightweight carbon fiber construction;
• Optimized weight distribution for more stable flight;
• Compatible with analog and digital FPV systems;
• Compact design, suitable for freestyle and light cinematic flight;
• Modular design – easy repair and component replacement.

Specification:

• Frame: SpeedyBee Bee25 PRO;
• Wheelbase: 120 mm;
• Carbon plate thickness: 2 mm;
• Camera mounting spacing: 19 / 20 mm;
• Maximum height of electronics: 18 mm;
• Flight controller (stack) mounting holes: 25.5 × 25.5 mm;
• Compatible VTXs: O3 Air Unit, RunCam Link, Vista, TX800, TXULTRA, etc. (some modules may require additional 3D printed parts);
• Propeller size: 2.5 inches;
• Motor mounting holes: 9 × 9 mm;
• Recommended engines: 1404 / 1504 / 1505;
• Recommended motors KV: 4S – 4300–4800 KV / 6S – 2350–2900 KV;
• Recommended battery: 4S – 650–1100 mAh / 6S – 650–850 mAh;
• Weight: about 68 ± 2 g.

Package:

1× Carbon fiber frame plate;
1× Propeller protective ring;
1× EXT PRO kit;
1× Front head;
1× Camera vibration damping gaskets;
1× Battery nylon strap (150 mm);
1× Battery elastic strap (35 mm);
1× Battery non-slip pad;
1× CNC strap fastener;
4× Motor cable protection tubes;
1× O3 copper antenna;
1× Bee25 Meteor LED strip;
1× Screwdriver set.

3D printed parts:

1× Antenna holder (right side);
1× Antenna holder (left side);
1× Receiver cover;
1× GPS module cover.

Other parts:

1× Type-C connector cable (4 Pin, 40 mm);
1× Micro USB connection cable (4 Pin, 40 mm);
1× SH1.25-4P male cable (25 mm);
1× SH1.25-4P female cable (25 mm);
1× Double-sided SH1.0-6P cable (35 mm);
1× Black power cable (35 mm);
1× Red power cable (35 mm);

Screws and fasteners:

5× M2 anti-slip nuts;
20× M2×6 mm button head screws;
18× M2×4 mm button head screws;
10× M2×7 mm button head screws;
6× M2×8 mm button head screws;
4× M2×12 mm flat head hex screws;
4× M1.6×4 mm flat head cross screws;
6× M1.6×8 mm hex screws.

Instructions in PDF format, English – BEE25