RadioMaster – AG01 CNC Hall Gimbal Set (2pcs)

Externally adjustable

① Set the lower limit of the position: turn the screw clockwise to decrease the position. Turn the screw counterclockwise to increase the stroke. Displacement range (38-54°);
② Set the upper limit of the position: turn the screw clockwise to decrease the position. Turn the screw counterclockwise to increase the stroke. Displacement range (38-54°);
③ Spring tension up and down: Turn the screw clockwise to increase the spring tension up and down. Turn the screw counterclockwise to decrease the spring tension up and down;
④ Centering and mode adjustment: When the screw is turned clockwise to the lowest point, this gimbal will not center up and down when the stick is released. When the screw is turned counterclockwise to the highest point, this gimbal will center up and down when the stick is released;
⑤ Left and right spring tension: Turn the screw clockwise to increase the tension of the left and right springs. Turn the screw counterclockwise to decrease the tension of the left and right springs.
Throttle spring tension adjustment: When there is no tension up and down, the tension is adjusted with the ⑥screw;
⑦Scale tension is adjusted with a screw.