GEPRC TAKER F405 BLS 50A Stack

GEPRC TAKER F405 BLS 50A STACK is a plug-and-play kit specially designed for use with DJI Air Unit. It uses STM32F405 chip, ICM42688-P gyroscope, integrated 16M black box, and GEP-BLS50A-4IN1 ESC, which provide more precise and smooth control feeling.

TAKER F405 BLS 50A STACK can be directly connected to the DJI Air Unit, eliminating the need for soldering. Improved Type-C USB connector increases the life of the socket and reduces the risk of poor contact. 9V 2.5A + 5V 3A dual independent BEC ensures more stable power supply for external equipment.

Features:

• The popular STM32F405 controller chip is used;
• The latest version of the 42688-P gyroscope has been installed;
• Integrated 16M memory black box;
• Integrated LC filter;
• Improved Type-C USB connector;
• Direct connection to DJI Air Unit;
• With GEP-BLS50A-4IN1 ESC, the flight becomes extremely smooth;
• Simple and rational installation method, and the shock-absorbing system allows the gyroscope to operate stably
• 9V 2.5A + 5V 3A independent dual BEC.

Specification:

GEP-F405-HD v2 Flight Controller:

• MCU: STM32F405;
• IMU: ICM42688-P (SPI);
• Compatibility with DJI Air Unit: Direct connection;
• Black box: 16M integrated;
• USB connector: Type-C;
• OSD: BetaFlight OSD with AT7456E chip;
• BEC: 5V, 9V dual;
• Firmware: GEPRCF405;
• Size: 36.8×36.8 mm;
• Mounting holes: 30.5×30.5 mm, φ4 mm holes become φ3 mm with silicone shock absorbers;
• Input voltage: 3-6S LiPo;
• UARTs: 6;
• Power filter: Integrated LC filter;
• Weight: 7.7 g.

GEP-BLS50A-4IN1 ESC

• Input voltage: 3-6S LiPo;
• Galvanometer: Yes;
• Constant current: 50A;
• Burst current: 55A (5 s);
• Supported modes: Oneshot125 / Oneshot42 / Multishot / Dshot150 / Dshot300 / Dshot600;
• Size: 42.9×39.7 mm;
• Mounting holes: 30.5×30.5 mm, φ4 mm holes become φ3 mm with silicone shock absorbers;
• Weight: 13.7 g;
• Firmware: G_H_30.

Package:

1x Flight controller;
1x 4-in-1 ESC;
1x Capacitor;
1x DJI Air Unit connection cable;
1x Flight controller connection cable;
1x XT60 power cable;
4x M3*30 screws;
4x M3*24 screws;
8x Nylon nuts;
8x Silicone shock absorbers;
2x SH1.0 4-pin silicone wires;
1x Camera connection cable.