HOTA F6+ 4x250W 15A 1-6S AC/DC

Features:

HOTA F6+ is a powerful four-channel smart charger designed to charge various types of batteries. It has an integrated 500 W power supply, which allows the charger to be powered directly from the mains. There is also an XT90 input for powering from a DC source - this is especially useful in outdoor conditions. When using an external battery (DC power), the device can charge up to 1000 W of total power (250 W per channel).

The device also supports synchronous operation - two channels can simultaneously charge one battery with a power of up to 500 W. A practical function is the DC power supply mode, during which the HOTA F6+ can operate as a regulated power supply: the output voltage can be set from 5 to 29 V and the current limit from 0.1 to 15 A (max. power - 250 W).

The charger also has a USB-A 5V/2A output for charging an RC transmitter or action camera, for example. In addition to charging, the HOTA F6+ can also discharge batteries - internal discharge reaches up to 12W per channel, and when using an external source - up to 250W per channel.

The device has a servo connector through which you can send PWM/PPM signals (use as a servo tester), or receive and measure them (check the operation of the RC receiver). All information is clearly presented on a color 2.8″ IPS display (320 × 240 px resolution).

Specification:

• Input voltage: 100-240 V AC / 6.5-30 V DC;
• Charging current: 0.1–15 A;
• Maximum charging power:
Up to 500 W total power (using AC input);
4 × 250 W (using DC input >24 V);
• Number of channels: 4;
• Supported battery types:
LiPo, LiIon, LiFe, LiHV: 1-6S;
NiCd, NiMH, NiZn: 1–16;
Lead acid (Pb): 1–12;
• Balancing current: 1000 mA;
• Internal discharge: 4 × 12W;
• External discharge: 4 × 250W;
• USB-A outputs: 2 × 5 V / 2.1 A;
• Display: 2.8″ IPS, 320 × 240 px;
• Dimensions: 115 × 126 × 87 mm;
• Weight: 935 g.

Package:

1× HOTA F6+ charger;
1× Power cord;
1x User manual.