HOTA F6 4x 250W 1-6S 15A DC Smart Charger

*Important: Charger power supply sold separately!

Features:

HOTA F6 is a four-channel smart charger designed for 1-6S LiPo batteries and more. It is powered via an XT60 connector from a DC source (voltage range 10.5-30V). Each channel can charge up to 250W (total power up to 1000W). Synchronous mode is possible, when two channels charge one battery with up to 500W.

In addition to the four main XT60 connectors for charging batteries, the charger also has a USB-A (5V/2.1A) and USB-C connector (up to 45W output power). The HOTA F6 also has a servo connector that allows you to send or receive PWM/PPM signals - this allows you to use the device as a servo tester or a tool to check the function of an RC receiver.

The charger supports all the most popular battery types – NiCd, NiMH, LiPo, Liion, LiHV, etc. Settings are made using a dial and button, and all information is presented on a color 2.8″ display. HOTA F6 can also perform discharge – internal discharge reaches up to 12 W per channel, and when using an external load – up to 250 W per channel.

Specification:

• Input voltage: 10.5-30 V DC;
• Charging current: 0.1–15 A;
• Maximum charging power: 4 × 250 W (when voltage >23 V);
• Number of channels: 4;
• Supported battery types:
LiPo, LiIon, LiFe, LiHV: 1-6S;
NiCd, NiMH: 1–16;
Lead acid (Pb): 1–12;
• Balancing current: 1000 mA;
• Internal discharge: 4 × 12 W;
• External discharge: 4 × 250 W;
• USB-A output: 5V/2.1A;
• USB-C output: up to 45 W;
• Screen: 2.8″, 320 × 240 px;
• Dimensions: 115 × 121 × 46 mm;
• Weight: 475 g.

Package:

1× HOTA F6 charger;
1x user manual.